FlyTop S.p.A | Droni – FlySmart®

FlySmart®

flysmart sonybandiera_inglese_e_italianaVersione italiana

The multicopter system FlySmart represents the entry-level model of the FlyTop S.p.A fleet.
Lightweight and simple to use (in manual or automatic mode), it is the ideal solution for carry out surveys of rocky ridges, cliffs or quarries, perform structural or thermal surveys on buildings and constructions, inspect bridges and overpasses, provide documentary evidence of archaeological sites, carry out environmental monitoring and provide support during disasters and emergency situations. FlySmart is also appropriate to support the journalistic activities and video and television survey. All while keeping operational costs within reduced budgets.
FlySmart is fully foldable: it is transported on the field already assembled and assembled and it is equipped with its own transport case. The UAV is made of a high quality carbon frame and can bring a 24 MPX camera or a compact camera as sensor. FlySmart needs only one operator that communicate with the UAV via PC or tablet. This is where the operator define the area to be detected and the flight planning process is activated. Once in the air, the UAV carries out the pre-set mission and strictly follows the flight plan until landing, again automatically, on the established point. In presence of obstacles or a smaller landing area, the operator can in any case exclude the automatic flight mode and land manually through the remote control.  It can be equipped with flight terminator to perform operations in critical areas.
The UAV system FlySmart enables three flight modes: manual, automatic and GPS. The manual mode, in which all flight functions and operations are delegated to the pilot, is ideal when the operator is in areas without GPS signal. Although the stabilization controls ensure the quality and safety of the flight, it is necessary a two days piloting course dedicated to the FlySmart, that may be conduct  at the FlyTop S.p.A airfield.
After the landing the data acquired are transferred from FlySmart to PC via cable or Wi-Fi and can be exported to all major formats.

 

Download_Manuale_PDF

FlySmart Features

✔ Digital Telemetry

✔ High quality carbon fibre frame

✔ Flight time 15 minutes

✔ 2 axes Gimbal

✔ Remote and/or automatic snapshot command

✔ Automatic Flight with set of the mission from PC or tablet, automatic take-off and landing

✔ Flight for experienced users with remote control for access in areas without GPS

✔ Engines and propellers specifically designed for a capacity load (payload) of 1 Kg

✔ Green, red, white signaling LED

✔ Battery charger for an operational area use or with the electricity grid

✔ Export data in all major formats

✔ Transportation Box customizable with company logo

FlySmart Technical Features

Max System Diameter: 98 cm (standard)
Height: 35 cm
Takeoff weight: 2.9 kg (without sensor)
Batteries: 2 lithium polymer-3S 11,1V with single capacity of 5200mAh
Engines: 6 brushless electric motors
Range: 1 to 4 km
Flight time: 15 minutes with 1 kg payload
Take-off: Autonomous from the ground or a platform
Landing: Automatic within a 3 x 3 m area or manual, assisted by stabilizers
Flight altitude (min-max): 1-150 m
Operators number: 1
Operating conditions: -5°C/+40°C
Standard cruising speed: 18 km/h
Mission Control: PC o Tablet
Sensors: Camera, compact camera, infra red
Automatic Navigation: Based on GPS, IMU, altimeter
Flight modes: Manual, automatic
Data Transmission: Wireless
Radio control links: 2.4 GHz for a maximum of 2Km distance between model and radio
Security checks: Return- to -launch in case of loss of the radio signal
Transport case: Aluminium fly bag with hinges and handles